Ashland Models | NDK Scrapers | Spencer, Ohio | Authorized K-TEC Scraper Dealer

Ashland 3413E

Maximize your production needs, with the Ashland 3413E scraper’s massive 34 yd³ heaped capacity. The 3413E ejector scraper features a spacious 74″ (188 cm) front opening and 25″ (63.5 cm) of ground clearance. Your material can easily exit the scraper unobstructed, reducing the need to double eject thicker material to allow your operator to place material exactly where it is needed, which increases daily production. The 3413E’s innovative bolt-together design allows these scrapers to be loaded into a 40’ high cube container.

Ashland 3013E

Ashland’s high-capacity construction scrapers are made to carry more so you can do more. The Ashland 3013E is a large-format ejector scraper with a 13′ width of cut and offers an impressive 30 yd³ heaped capacity. The 3013E incorporates a modular design to increase flexibility and efficiency while offering excellent value for you as a contractor. The 3013E scrapers can be equipped with a rear quick-hitch that allows you to easily hook up scrapers in tandem. Mixed fleets are able to connect other scraper brands including K-Tec (2″), John Deere (60mm), and Ashland (1.5″).

Ashland 2811E

The 2811E is ideal for customers who need to move material near highly populated areas. The under 12′ road transport width reduces your mobilization cost since permits or escort vehicles are not needed. The 11′ width of cut on the 2811E scraper is the perfect match for smooth clearing behind high horsepower rubber track tractors.

Ashland 2411E

The 2411E has design features that allow you to load and unload the scraper with ease. The front section is attached low to the bowl just over the cutting edge. This lower pull point gives you a smoother cut at a faster speed. The vertical position of the lift cylinders enables faster blade response, allowing you to keep the tractor pulling the desired powerband to make large, quick loads. The long hitch transfers 77.5% of the load weight onto the rear tires while reducing the weight placed onto the tractor. The extended front section and large gate opening allows for material to unload quickly without double ejecting.

Ashland 2114E

The Ashland 2114E has a wide 14ft (4.26m) cutting width to enhance productivity when leveling fields and finish grading. It features optional advanced slope control and walking tandem axles, ensuring maneuverability and stability for a smooth operation, making this specialized machine a perfect multifunction solution to complete your earthmoving projects.

Ashland 3250SS

Your compact track loader can load and transport bulk material with Ashland’s 3250SS Scraper. The scraper’s 81.5″ width of cut perfectly fits larger compact track loaders on the market. No matter what your site demands, the 3250SS can cut, carry, and dump up to 3 1/4 cubic yards. With the 3250SS, You can quickly finish large landscape projects, or assist in cleaning up around construction sites. The integrated leveling blade handles final grading in a single pass.

Ashland 50CS

The 50CS, 5 cu.yd. is a fixed position dump style scraper. This earthmover is a small scraper ideal for farmers, landscapers, and weekend warriors who have real projects. With a single hydraulic remote operation for 100 HP.+ MFWD tractors, it doesn’t take much to get a lot done — tons of earthmoving potential in a compact package.

Ashland 950XL2

The 950XL2 has a history of proven performance that you can rely on for all your agricultural applications. Designed to be pulled by your front wheel assist tractor, the 950XL2 is Ashland’s smallest ejector scraper for your farm and field. It’s narrow width allows for maneuverability through feed lot gates and other tight areas where you need to move dirt.

Ashland 1410E

The 1410E is a rear lift ejector scraper. This design allows the floor of the scraper to remain nearly flat while loading, making field drainage and ditch clearing a simple task. The side router blades extend beyond the blades to funnel material into the bowl while you are loading the scraper. The forward-placed router blades and flat floor angle are beneficial when loading loose material while you are levelling the ground for irrigation.

Ashland 155TS2

If you have a large MFWD or smaller articulated 4WD tractor, the 155TS2 scraper fits the bill. You will also benefit from the additional capacity over other agricultural earthmovers with the structural strength of a construction-grade scraper. The narrow width of 155TS2 is ideal when working in tighter areas with MFWD tractors. Despite being very maneuverable, this scraper’s large rear tires, 15.5 cubic yard capacity, and large gate opening are perfect for quickly loading heavy clay, transporting up steep slopes, and unloading where you want especially when working on projects like pond and terrace building.

Ashland 175XL2

Your land is your life blood – the more you can get from it the better. The 175XL2 was built to make the most of your valuable time, prepping your land for maximum production. You can reshape waterways, repair washouts, expand holding ponds, and create a new building pad on your property. The 175XL2 is the largest front dolly wheeled scraper within the Ashland lineup. The machine is built for maintaining and improving the most valuable asset you own, your land.

Ashland 1812E

Designed using the same guiding principles as its big brothers – the Ashland high capacity construction scraper line – the 1812E packs all the same impressive performance into a smaller package, making it an ideal earthmoving solution for mid-high horsepower tractors. The 1812E has the perfect combination of width, capacity, weight transfer ratio, and ground-engaging geometry to suite the needs of farmers and construction contractors doing smaller earthmoving projects.